Products
Five arrangements. Sixteen components. Eleven finishes.
Every part is ordered in one code. Pick the arrangement, the glass and the finish, and the kit list writes itself:D10 — WI — 1400×2000 — BB
Thickness
8 mm or 10 mm toughened
Type
Low-iron, polished four edges
Weight
20 or 25 kg per m²
Cutouts
CNC, before tempering
Arrangements
One setting-out line each.
- D10 — INInlineDoor and fixed panel in one run, wall to wall.
- D10 — FPFixed panelChannel one side, free edge the other.
- D10 — WIWalk-inScreen open one end, optional return panel.
- D10 — PVPivot doorDoor in a recess, hinged off the wall.
- D10 — WRWetroomSloped ceilings, period walls, falls in the floor.
Components
Hinges, clamps, channel, seals.
Hinges
- DH-GW90Hinge, glass to wall 90°
Two per door up to 750 mm
- DH-GW180Hinge, glass to wall 180°
Inline wall fixing
- DH-GG90Hinge, glass to glass 90°
Corner returns
- DH-GG135Hinge, glass to glass 135°
Neo-angle sets
- DH-GG180Hinge, glass to glass 180°
Door off a fixed panel
- DH-GG180FFolding hinge 180°
Deflector and flipper panels
Clamps
- DC-GW90Clamp, glass to wall 90°
Fixed panel to wall
- DC-GW180Clamp, glass to wall 180°
Inline fixing
- DC-GG90Clamp, glass to glass 90°
Return panel corner
Channel & seals
- DU-2400U-channel, 2400 mm
Stainless only. Cut on site
- DS-08Seal, 8 mm glass
Bubble and fin
- DS-10Seal, 10 mm glass
Bubble and fin
- DS-08-2MSeal, 8 mm glass, 2 m
Cut length
Accessories
- DA-SB1200Support bar set, 12×12 mm, 1200 mm
Glass to wall bracing
- DA-KN30Door knob, square, back to back
Ø12 mm hole in the door
- DA-SP3Spacer, 3 mm
For DH-GW90 on out-of-plumb walls
Finishes
Eleven finishes, one code each.
Every hinge, clamp, knob and support bar is supplied in the finish you name. Channel is stainless steel throughout; seals carry no finish.
BBBrushed brassMBMatt blackBNBrushed nickelBZBronzeCHChromeGMGun metalBGBrushed gun metalPBPolished brassMWMatt whiteBCBrushed copperRGPolished rose goldSSStainless steel
